How blocks lose control
A twelve-lot block turns over tenants steadily. Each tenancy issues keys, some are lost, some are copied for partners and cleaners, and few are formally returned. After a decade the number of working common-entry keys can exceed the number of residents several times over.
Nothing dramatic happens until it does: an unexplained entry, a bike theft from a shared store, a mail interference issue. At that point the owners corporation discovers there is no register to work from.
Step one: rekey the common areas, do not replace them
Common-entry cylinders, mailbox banks, bin and bike stores and basement doors can almost always be rekeyed rather than replaced. That retires every existing key at once for a fraction of the hardware cost.
Rekeying should be a single coordinated event. New keys are cut and labelled per lot first, distribution is arranged, and only then are cylinders changed — so no resident arrives home to a lock their key no longer opens.
Step two: move to a restricted profile
Rekeying without changing key control just restarts the same drift. A restricted key system uses a protected blank so copies cannot be cut without written authority from the registered holder — usually the owners corporation or its manager.
This is the mechanism that makes a register meaningful. It also gives the committee a defensible position: keys issued are recorded, and additional copies require a documented request.
Step three: build a register and keep it
Record every key by number, level and holder, with the date issued. Include contractor keys and any held by the manager or building caretaker. Review it at each annual general meeting, and treat unreturned keys at the end of a tenancy as a maintenance item, not a nuisance.
Where a block has a master system, note the level of each key too. A missing master is a very different problem to a missing lot key and should trigger different action.
Practical notes on planning and communication
Plan by door, not by lot: it is the number of common cylinders that drives the work, plus keys per lot. Most small blocks are completed in a single visit.
Communicate before the change. A letterbox notice a week ahead, a nominated collection window, and a contact for anyone who will be away avoids the calls that otherwise arrive at 11pm on changeover day.
